SILK'N Facetite MP Rejuvenation & EMS Device

The latest beauty technology targets aging problems such as eye wrinkles, sagging skin, smile lines, roughness, darkening, enlarged pores caused by collagen loss and neck wrinkles. The Israeli company has developed a new HT technology that combined three types of energy: Infrared (IR), Low-Level Light Therapy (LLLT) and Multi-Platform Radio Frequency (RF) energy. The device has a strict temperature control, there is precise temperature control with upgraded 100 times/second level temperature monitoring. The device will be stop working for avoiding burns when the skin temperature exceeds 43°C.

Frequency: 1-2.2MHz dual-frequency variable frequency radiofrequency

Red light wavelength: 630nm red light

Infrared wavelength: 780nm near-infrared light

Waterproof level: main head - IPX5 (the body cannot be directly washed with water)

SILK'N Facetite MP

❶ "Face+Eyes" dual mode easily resists signals of aging on the face, targeting skin problems such as under-eye wrinkles, sagging skin, roughness and dullness of skin.

❷ 1~2.2MHz dual-frequency and triple-source radio frequency technology (IR infrared, LED red light, RF radio frequency) promote collagen active in the entire dermis, precisely targets for the deep dermis, heating up faster and with more precision, effectively lifts the facial muscles, and the energy can penetrate into the skin deeply.

❸ 15-pole large-range RF heating field, fast warms up for entire face, keeping collagen active in maximum temperature, also provides more efficient care.

❹ 4000mAh lithium battery, longer standby time, supports charging and use, and can be charged while in use.

❺ Easy to clean, the main device and the accessories are both waterproof. that can be rinsed with water directly which reducing bacterial growth.

SILK'N Facetite MP

Q: How long do I need to use it each time?

A: To achieve the best results, it is recommended to perform 2 full-face treatments of about 15 minutes each per week within the first 8 weeks, with at least 1 day between each use. After 8 weeks, the frequency of use can be reduced by half. You can use the main device for 3 minutes on single areas such as eye area, nasolabial folds, and smile lines, and then use the diamond thermal field DEMS head to treat the entire face, including both cheeks, forehead, and neck, for 5 minutes per area.

Q: How long can it be used when fully charged?

A: The FaceTite MP radiofrequency instrument can be used for 30 minutes when fully charged for 3 hours. When the battery is low, it can be used while charging. Due to different environmental temperatures, the battery usage time may vary, so please refer to your actual usage time.

Q: Can it be used on sensitive skin?

A: It can be used on sensitive skin. It is recommended to start with the lowest energy level and give your skin a gradual adaptation process. If there are no adverse reactions, it can be used normally. However, if you have an extremely rare heat allergy, such as developing a rash when washing your face with hot water, it is not recommended to use it. In general, as long as it is not used during a skin allergy period, it can be used safely.

Q: Under what circumstances can't the Facetite MP multi-platform radiofrequency beauty instrument be used?

A: The instrument cannot be used during cancer treatment, pregnancy, or if there are electronic implants such as pacemakers in the body. Medications or cosmetic procedures may also cause adverse skin reactions. It is recommended to try using the instrument on healthy skin first, and if there is no discomfort after use, it can be used normally.

Q: How much gel is enough to use?

A: It is generally recommended to use about 5g of gel on one side of the face, and more gel can be added as needed during the process. It is recommended to finish treating one side of the face before moving on to the other side to save gel usage.

Q: Can I apply a face mask after using it?

A: After finishing the treatment, the gel can be washed off with warm or clean water, and then a face mask can be applied. It is recommended to apply a moisturizing mask and follow normal skincare routine afterwards.

Q: Is there a risk of burns?

A: The FaceTite MP has strict temperature monitoring devices, with upgraded temperature monitoring at a rate of 100 times per second, which is more accurate. When the skin temperature exceeds 43℃, the instrument will stop working to avoid the risk of burns.

Q: How long does it take for the product to take effect?

A: The time and effectiveness of the radiofrequency instrument varies from person to person, depending on individual skin quality and frequency of use. Generally, following the official guidelines for 2 to 4 weeks can effectively improve facial problems such as dull skin tone and fine lines under the eyes. After one cycle of cell metabolism renewal, the effect will be more significant. After two cycles of use, it can achieve results such as firming, reducing wrinkles, refining pores, and brightening skin.

Q: What is the difference between fixed frequency and variable frequency?

A: Fixed frequency means that the operating frequency of the beauty instrument remains at 1MHz, while variable frequency means that there are two modes, and the instrument automatically changes the frequency during use. Our dual-variable frequency continuously changes within the range of 1-2.2MHz. The advantage of variable frequency is that it can quickly reach and maintain a temperature of 43°C, which can activate collagen more quickly and effectively, and address issues such as wrinkles, sagging, and dullness.

Q: Is the newly added colorless near-infrared light based on the same principle as milk light and near-infrared light?

A: The wavelengths of the three types of light are different. The radiofrequency instrument belongs to the 780nm band, milk light belongs to the 900nm-1800nm band, and near-infrared light belongs to the 800nm-2500nm band.

Q: What is the principle of the product?

A: The FaceTite MP dual-variable frequency and triple-source technology promote collagen throughout the entire dermis with four depths. The dual-variable frequency continuously changes within the range of 1-2.2MHz, and the 15-level electrode heats the entire face to form a radiofrequency thermal field. The triple source of infrared, red light, and radiofrequency complement each other to penetrate the dermis to the maximum extent.

Q: What is the difference between the new near-infrared light and ZPRO's IR infrared light?

A: The main function of the new near-infrared light at 780nm and ZPRO's IR infrared light at 850nm is to help open the skin barrier, which is beneficial for radiofrequency energy and LED red light energy to penetrate into deeper layers of the skin. The difference is that ZPRO's IR infrared light can penetrate deeper into the skin and has stronger penetration ability.

Q: What are the features or improvements in the product's functions?

A: The FaceTite MP features a unique multi-head design of variable frequency diamond thermal field (1-2.2MHz) + diamond carving host (1MHz), with a dual-head design for anti-aging in different areas, making it a versatile product. It also has five times more electrode pads, with a coverage area of 1766mm², which can maintain a large 43°C radiofrequency thermal field and effectively heat the dermis to reshape new collagen. It is also the first radiofrequency instrument that can be directly washed. The diamond thermal field kit (IPX7) + carving host (IPX5) are both waterproof, and can be washed with water or disinfectant, preventing bacteria from breeding.